Home / Products / Accessories / Electrical / Fans speed controllers

MTP MTP
Regulator is intended for the devices with the input voltage of 0–10V and the output voltage of +10V.
ET ET
Manual regulation of speed or airflow of voltage controllable (230 Vac, 50 Hz) motors and fans. Several motors can be connected as long as the current limit is not exceeded. These speed-controllers offer an excellent and accurate regulation. What’s more, the splash-proved housing (as well with inset as with surface mounting) allows the use in a demanding (damp) environment. E.g. kitchens or bathrooms… Fast current and temperature fuses complete this user-security.
TGRT TGRT
Transformer controllers are designed to change motor rotating speed by changing voltage. All controllers are with motors and transformers thermo protection function. 3 phase controllers are with power supply fault protection. When power supply recovered, controller did not switch on previous step until is switched OFF and ON to desired step. Steps are with fix voltage and are changed with rotary switch. Controllers also have power indication led. All controllers have 230 VAC output for connection servo motors, actuators, heaters relays and etc.
To one controller more than one motor can be connected, if total current of all controllers is less than maximum controller current. In this case all motors thermo protections must be connected in series.

TGRV TGRV
Transformer controllers are designed to change motor rotating speed by changing voltage. All controllers are with motors and transformers thermo protection function. 1 phase controllers are with power supply fault protection. When power supply recovered, controller did not switch on previous step until is switched OFF and ON to desired step. Steps are with fix voltage and are changed with rotary switch. Controllers also have power indication led. All controllers have 230 VAC output for connection servo motors, actuators, heaters relays and etc.
To one controller more than one motor can be connected, if total current of all controllers is less than maximum controller current. In this case all motors thermo protections must be connected in series.
SMT-D SMT-D
EC motor control switch. These control switches are to be used in combination with EC motors from which the 10 V supply voltage is converted into three steps to obtain a minimum, mid and maximum position. Position 1 and 2 can be adjusted to environmental requirements. Two types are available: SMT-D -3P without off-position and SMT-D -4P with off-position. Thanks to their splashproof casing (IP44/54) (for surface-mounting as well as for flush-mounting) they can be used in most demanding (like humid) circumstances (e.g. for kitchens or bathrooms).

SALDA UAB
Ragainės g.100, Šiauliai LT-78109 LITHUANIA
Tel. +370 41 540 415 Fax. +370 41 540 417
info@salda.lt