Home / Products / Accessories / Electrical / Electrical heaters controllers

5637211583 EKR 6.1
EKR6.1 is a proportional controller of electrical heating controller with automatic adaptation of voltage. An internal or an external sensor is used with the device. EKR6.1 controls the heating intensity by switching electrical power on or off. The ratio between the off-time and on-time depends on the need for heating and can vary in the range between 0% and 100%. EKR6.1 is suitable for the control of electrical heating only. Its principle of operation preclude its being used for the control of motors or lighting systems. EKR6.1 is not suitable for the control of three-phase electrical current, it is used to control monophasic and diphase heaters only.
Title Art No.
EKR 6.1 PRGR0011
down
Line below arrow

5637211585 EKR 15.1
EKR15.1 is a proportional controller for electric heaters with automatic voltage adaptation. EKR15.1 controls the whole load On-Off. The ratio between On-time and Off-time is varied 0-100% to suit the prevailing heat demand.
EKR15.1 is designed only for electric heating control. The control principle makes it unsuitable for motor or lighting control.
EKR15.1 can control 15kW heater and has relay output for extra load control with contactor, on which can be connected load up to 12kW. Full load can be 27kW.
down
Line below arrow

5637211587 EKR 15.1P
EKR15.1P is a proportional controller for multistep(up to 5 steps) electric heaters with automatic voltage adaptation. EKR15.1P controls the whole load On-Off. The ratio between On-time and Off-time is varied 0-100% to suit the prevailing heat demand.
EKR15.1P is designed only for electric heating control. The control principle makes it unsuitable for motor or lighting control.
EKR15.1P can control with triac output 15kW heater and has four relay outputs for 4 extra load steps control with contactors, on which can be connected load up to 225kW. Full load can be 240kW.

down
Line below arrow

5637211589 EKR 30
EKR30 is a proportional controller for electric heaters with automatic voltage adaptation. EKR30 controls the whole load On-Off. The ratio between On-time and Off-time is varied 0-100% to suit the prevailing heat demand. EKR30 is designed only for electric heating control. The control principle makes it unsuitable for motor or lighting control.
EKR30 can control 30kW heater and has relay output for extra load control with contactor, on which can be connected load up to 12kW. Full load can be 42kW.
down
Line below arrow

5637211591 EKR 30P
EKR30P is a proportional controller for multistep (up to 5 steps) electric heaters with automatic voltage adaptation. EKR30P controls the whole load On-Off. The ratio between On-time and Off-time is varied 0-100% to suit the prevailing heat demand.
EKR30P is designed only for electric heating control. The control principle makes it unsuitable for motor or lighting control. EKR30P can control with triac output 30kW heater and has four relay outputs for 4 extra load steps control with contactors, on which can be connected load up to 225kW. Full load can be 255kW.
down
Line below arrow

5637252579 TR5K
TR5K and TR1K are used for external temperature setpoint connecting them to controllers (EKR6.1, EKR15.1, EKR30, EKR-K and etc.).
For indoor installation.
• TR5K – potentiometer 5KΩ.
• Setpoint range – 0..30°C.
• Protection class – IP20

down
Line below arrow

SALDA UAB
Ragainės g.100, Šiauliai LT-78109 LITHUANIA
Tel. +370 41 540 415 Fax. +370 41 540 417
office@salda.lt www.salda.lt