Controls the whole load On-Off. The ratio between the On-time and Off-time is varied 0%-100% to suit the prevailing heat demand.

EKR 15.1P is a proportional controller for multistep (up to 5 steps) electric heaters with automatic voltage adaptation. EKR 15.1P controls the whole load On-Off. The ratio between On-time and Off-time is varied 0%-100% to suit the prevailing heat demand.

EKR 6.1 is a proportional controller for electric heating, with automatic adaptation of voltage. An internal or an external sensor is used with the device. EKR 6 controls the heating intensity by switching electrical power on or off. The ratio between the on-time and off-time depends on the need for heating and can vary in the range between 0% and 100%.

Transformer-based speed controllers TGRV are designed to control the rotation speed of fans (~1 f, 230 V, 50 Hz).

Transformer controllers are designed to change motor rotating speed by changing voltage. All controllers are with motors and transformers thermo protection function.

Transformer-based speed controllers TGRTex are designed to control the rotation speed of fans (~3 f, 400 V, 50 Hz) with explosion-proof motors.

Manual regulation of speed or airflow of voltage controllable (230 Vac, 50 Hz) motors and fans.

Regulator is intended for the devices with the input voltage of 0–10V and the output voltage of +10V.

The remote control device is designed for controlling cooling devices with heat recuperation (RIS 260 -1900 and RIRS 400 – 1500).

The remote control device is designed for controlling cooling devices with heat recuperation (RIS 260 -1900 and RIRS 400 – 1500).

The programmable remote control device is designed for controlling cooling devices with heat recuperation (RIS 260 -1900 and RIRS 400 – 1500).

The main function of the mixing point is to control, jointly with the control system, the temperature of supplied water in water heaters.